About us

Potting / Encapsulation

Electronic Encapsulation or Potting is a coating process that protects a component, an electronic card or an electronic assembly against shocks and vibrations, but also against environmental stresses (thermal shocks , moisture, chemical aggressions, salt spray, ...).

The most widely used materials are polyurethanes, epoxy and / or silicones. Our machines use products / resins from:  AXSON (SIKA), VON ROLL (Damival), WEVO, RESOLTECH, RAIGI .....

Bonding / Sealing

The important progress made in the field of adhesives (generic term for adhesives, sealants and coating) allows the assembly of almost all materials. The bonding technique has been used for several years in the manufacture of motor vehicles, railway vehicles, aeronautics and many other industries. Bonding is a highly technical field.

In order to obtain a perfect final result and to deposate an accurate glue quantity, a mixing and injection machine seems to be important to process high viscosity products - two components (base and hardener): A and B.p>

Isojet offers mixing and injection machines for Bonding and Sealing.

Molding / Casting

The casting or molding process is a duplicating technique used to make limited series of functional parts, because it allows the accurate reproduction of your pieces using a open silicone mold or open light metal alloy mold.

The materials used are polyurethanes, silicones .... For a repeatability and homogeneous production a une mixing and dosing machine is essential especially when the components have a short pot life.

Isojet offers mixing and dosing machines for casting and molding.

RIM injection

Injection molding molding (RIM) is a molding process for making plastic parts. This process consists in injecting into a closed mold a mixture of two liquid components, polyol (base) and isocyanate (hardener) which, by reacting with each other, gives a polymer / resin..

Since the mixture is liquid at injection time, it's casted low pressure with an injection or mixing machine, in molds and on presses.

Isojet offers dosing and mixing machines for RIM injection.

RTM Injection / infusion ( OOA)

Injection molding (RTM) or low pressure molding involves injecting a liquid resin, charged or not, into the closed cavity of a mold and a counter-mold previously filled with dry reinforcements.

Infusion molding( Vacuum Process OOA - Out of autoclave)  is a modern process for the manufacture of composite materials. Infusion moldnig involves vacuum injection of a low viscosity resin into a stack of fabrics (glass, carbon..) . The assembly is placed under vacuum by a flexible membrane in a mold. The vacuum is used to compact the fabrics and control the process. The resin is then introduced by suction of the vacuum and migrates through the laminate until the part is completely impregnated.

Isojet offers RTM and infusion injection machines.